Hilo V2 Module GPRS Class10
Réf. : HILO V2

Hilo V2 Module GPRS Class10

The HiLo V2 module is one of the smallest available GPRS (multislot class 10) quad band module of the market

with an industrial connector. The target application is the Machine to Machine (M2M) market including

automotive, AMM (Automatic Metering Management), tracking system, Alarm, etc. Despite its small size and

cost, it has comprehensive GSM/GPRS services, data and IP features.

In addition to its size it has the following outstanding characteristics:

- Automotive temperature range: -40°C to +85°C

- Minimum low power consumption in idle mode: 1.25 mA in DRX5

- Full automotive qualification regarding ISO16750 standards

- High input voltage range: 3.2 V to 4.5 V

- Digital PCM audio

- Fully form factor compliant with the HiLo

- Pin to pin compliant with the main HiLo pins (power supplies, UART, Sim and audio pins)

GSM_GPRS ROHS
>> Spécifications constructeur >> Data Sheet >> Voir les détails (spécifications)

Spécifications de HILO V2

Dimensions 43 X 34 X 3,2 mm
Frequency Band 850, 900, 1800, 1900 MHz
GPRS Multislot Class class 10 (3+2 & 4+1)
GPRS Baud Rate DL up to 85,6 kbps, UL up to 42,8 kbps
Power supply DC voltage (min / max / nominal) 3.3 V / 4.5 V / 3.8 V
Consumption in Communication mode 280 mA average, 2200 mA peak during TX slot
Consumption in Standby mode (can receive a call) < 1.5 mA
Consumption in off mode <50 uA
HILO NC V2 - Non Connectorisé
Réf. : HILO NC V2

HILO NC V2 - Non Connectorisé

Plus petit que le HILO ( 24*24*2,5 mm ) ce module se caractérise par une interface sans connecteur.

 

GSM_GPRS ROHS
>> Spécifications constructeur >> Data Sheet >> Voir les détails (spécifications)

Spécifications de HILO NC V2

Taille 24 X 24 X 2,5 mm
Bande de fréquence 850, 900, 1800, 1900 MHz
GPRS Multislot Class class 10 (2+4, 5 active active time slot at a time)
GPRS débit DL up to 85,6 kbps, UL up to 42,8 kbps
Alimentation DC (min / max / nominal) 3.3 V / 4.5 V / 3.7 V
Consommation en mode communication 220 mA average, 2200 mA peak during TX slot
Consommation en standby < 2 mA
Consommation en mode eteint <50 uA