Antenna and electrical specifications
Cable 1
Parameters | CELLULAR/LTE Antenna | ||
Standards | 2G,3G and 4G | ||
Band (MHz) | 700/850/900 | 1700/1800/1900/2100 | 2600 |
Frequency (MHz) | 698-960 | 1710-2170 | 2500-2700 |
Return Loss (dB) | ~-13.3 | ~-18.3 | ~-9.8 |
VSWR | ~1.8:1 | ~1.3:1 | ~2.0:1 |
Efficiency (%) | ~53 | ~49 | ~25 |
Peak Gain (dBi) | ~2.4 | ~1.3 | ~0.4 |
Average Gain (dB) | ~-2.7 | ~-3.0 | ~-5.9 |
Impendance (Ohm) | 50 | ||
Polarisation | Linear | ||
Radiation Pattern | Omni-Directional | ||
Max. Input Power (W) | 25 | ||
Connector Type | SMA-Male Standard (Other Connectors Available) | ||
Cable Length | 300 cm Standard (Any Cable Length Available) | ||
Cable Type | LMR100 Standard (Other Cables Available) |
Cable 2
Parameters | GPS/GLONASS Antenna | ||
Standard | GPS/QZSS/Galileo | GLONASS | |
Band (MHz) | 1575 | 1602 | |
Frequency(MHz) | 1575.42 | 1598-1606 | |
Patch Size (mm) | 25 x 25 x 4 | ||
Return Loss (dB) | <=-15 dB | ||
VSWR | <=1.4:1 dB | ||
Impedance | 50 | ||
Radiation Pattern | Hemispherical | ||
Polarization | RHCP | ||
Saw Filter | pre-filter | ||
Active Gain (dB) | 28 @ 2.7 V | ||
Noise Figure (dB) | 1.5 Typ | ||
Voltage (V) | 1.5 – 3.6 | ||
Current (mA) | 9 Typ | ||
Power Consumption (mW) | 24.3 Typ | ||
ESD Protection | 2kV | ||
Connector Type | SMA-Male Standard (Other Connectors Available) | ||
Cable Length | 300 cm Standard (Any Cable Length Available) | ||
Cable Type | LMR100 Standard (Other Cables Available) |
Antenna Measurement Conditions:
Mounted on 30 x 30 x 0.25 cm ABS Plate
200 cm of Cable LMR100
Measured in Certified CTIA 3D Anechoic Chamber
Mechanical and environmental specifications
Specifications | GC-4841PGF |
Mounting Type | Adhesive Mount |
Dimensions (mm) | 83 x 35 x 13.3 |
Radome | ABS UV Stable |
Radome color | Black |
Operating Temperature (C) | -40 to +85 |
Storage Temperature (C) | -40 to +85 |
Substance Compliance | RoHS |
Antenna parameters