Antenna and electrical specifications
Cable 1
| Parameters | CELLULAR / LTE Antenna | ||
| Standards | 2G,3G and 4G | ||
| Band (MHz) | 700/850/900 | 1700/1800/1900/2100 | 2600 |
| Frequency (MHz) | 698-960 | 1710-2170 | 2500-2700 |
| Return Loss (dB) | ~-10.6 | ~-15.6 | ~-11.7 |
| VSWR | ~1.9:1 | ~1.6:1 | ~1.7:1 |
| Efficiency (%) | ~57 | ~57 | ~47 |
| Peak Gain (dBi) | ~2.1 | ~4.2 | ~3.1 |
| Average Gain (dB) | ~-2.4 | ~-2.5 | ~-3.3 |
| Impendance (Ohm) | 50 | ||
| Polarisation | Linear | ||
| Radiation Pattern | Omni-Directional | ||
| Max. Input Power (W) | 25 | ||
| Connector Type | Most RF Connectors (SMA-Male Standard) | ||
| Cable Length | Any Cable Length (300 cm Standard) | ||
| Cable Type | Other Cables Available (LMR195 Standard) |
Cable 2
| Parameters | CELLULAR / LTE Antenna | ||
| Standards | 2G,3G and 4G | ||
| Band (MHz) | 700/850/900 | 1700/1800/1900/2100 | 2600 |
| Frequency (MHz) | 698-960 | 1710-2170 | 2500-2700 |
| Return Loss (dB) | ~-11.0 | ~-14.3 | ~-16.5 |
| VSWR | ~1.9:1 | ~1.6:1 | ~1.4:1 |
| Efficiency (%) | ~63 | ~54 | ~57 |
| Peak Gain (dBi) | ~3.0 | ~3.2 | ~4.0 |
| Average Gain (dB) | ~-2.0 | ~-2.6 | ~-2.4 |
| Impendance (Ohm) | 50 | ||
| Polarisation | Linear | ||
| Radiation Pattern | Omni-Directional | ||
| Max. Input Power (W) | 25 | ||
| Connector Type | Most RF Connectors (SMA-Male Standard) | ||
| Cable Length | Any Cable Length (300 cm Standard) | ||
| Cable Type | Other Cables Available (LMR195 Standard) |
Antenna Measurement Conditions:
Mounted on Metal Plate of 30 x 30 cm
200 cm of LMR195 Cable
Measured in Certified CTIA 3D Anechoic Chamber
Cable 3
| Parameters | 2.4/5.0 GHz ISM Antenna | ||
| Standards | WiFi, BT, ZigBee, ISM | ||
| Band (MHz) | 2.4 GHz | 5.0 GHz | |
| Frequency (MHz) | 2410-2490 | 4920-5925 | |
| Return Loss (dB) | ~-10.4 | ~-13.6 | |
| VSWR | ~1.9:1 | ~1.6:1 | |
| Efficiency (%) | ~58 | ~64 | |
| Peak Gain (dBi) | ~5.6 | ~5.5 | |
| Average Gain (dB) | ~-2.3 | ~-1.9 | |
| Impendance (Ohm) | 50 | ||
| Polarisation | Linear | ||
| Radiation Pattern | Omni-Directional | ||
| Max. Input Power (W) | 25 | ||
| Connector Type | Most RF Connectors (SMA-Male Standard) | ||
| Cable Length | Any Cable Length (300 cm Standard) | ||
| Cable Type | Other Cables Available (LMR195 Standard) |
Cable 4
| Parameters | 2.4/5.0 GHz ISM Antenna | ||
| Standards | WiFi, BT, ZigBee, ISM | ||
| Band (MHz) | 2.4 GHz | 5.0 GHz | |
| Frequency (MHz) | 2410-2490 | 4920-5925 | |
| Return Loss (dB) | ~-8.9 | ~-13.6 | |
| VSWR | ~2.1:1 | ~1.6:1 | |
| Efficiency (%) | ~57 | ~59 | |
| Peak Gain (dBi) | ~5.5 | ~4.4 | |
| Average Gain (dB) | ~-2.4 | ~-2.3 | |
| Impendance (Ohm) | 50 | ||
| Polarisation | Linear | ||
| Radiation Pattern | Omni-Directional | ||
| Max. Input Power (W) | 25 | ||
| Connector Type | Most RF Connectors (SMA-Male Standard) | ||
| Cable Length | Any Cable Length (300 cm Standard) | ||
| Cable Type | Other Cables Available (LMR195 Standard) |
Antenna Measurement Conditions:
Mounted on Metal Plate of 30 x 30 cm
200 cm of LMR195 Cable
Measured in Certified CTIA 3D Anechoic Chamber
Cable 5
| Parameters | GPS/GLONASS Antenna | |
| Standard | GPS/QZSS/Galileo | GLONASS |
| Band (MHz) | 1575 | 1602 |
| Frequency(MHz) | 1575.42 | 1598-1610 |
| Return Loss (dB) | <=-14 | |
| VSWR | <=1.5:1 | |
| Impedance | 50 | |
| Radiation Pattern | Hemispherical | |
| Polarization | RHCP | |
| Saw Filter | Pre-Filter | |
| Active Gain (dB) | 28 @ 2.7 V | |
| Noise Figure (dB) | 1.8 @ 2.7 V | |
| Voltage (V) | 1.5 – 3.6 | |
| Current Consumption (mA) | 9 @ 2.7 V | |
| Power Consumption (mW) | 24.3 @ 2.7 V | |
| Out of Band Rejection (dBc) | ~43 | |
| ESD Protection (kV) | 6 | |
| Connector Type | SMA-Male Standard (Other Connectors Available) | |
| Cable Length | 300 cm Standard (Any Cable Length Available) | |
| Cable Type | LMR100 Standard (Other Cables Available) |
Mechanical and environmental specifications
| Specifications | GC-7050BGa |
| Mounting Type | Screw Mount |
| Dimensions (mm) | Ø 96 x H 90 |
| Radome | ASA |
| Radome color | White, Black |
| Antenna Base | Alluminium alloy |
| Operating Temperature (C) | -40 to +85 |
| Storage Temperature (C) | -40 to +85 |
| Substance Compliance | RoHS |
| Certificates | IP67, IP69, IK09 |
Antenna parameters
Jumper cables drawings – Optional
